DelAgua uses cookies to track visits to our website only, no personal information is collected.

Find out more about our cookie policy.

Close
 
DelAgua Single Incubator Plus Kit
Brand: DELAGUA
DWT Code: 11372
Supplier Code: BasicPlus
  • Product Image
KEY FEATURES
  • 44°C incubator chamber for analysis of faecal coliforms
  • Internal battery, sealed within the case housing, which can be re-charged from mains or a car battery. The unit is capable of up to 5 runs before recharging is required.
  • 16 test capacity
  • Membrane filtration unit using 47mm 0.45μm pore size membrane filters
The DelAgua Single Incubator PLUS Kit is the next step in flexibility for the DelAgua Water Test Kit family.
or
Phone +44 (0) 1672 861 198
DESCRIPTION

The DelAgua PLUS Kit range is the next step in flexibility for the DelAgua Water Test Kit family. The Single Incubator, designed for microbiological water monitoring via detection of indicator organisms for E. coli, cholera, salmonella and other faecal water borne pathogens, is the most popular portable water testing system in the developing world. Built with an internal battery, it is capable of up to 5 incubation cycles between recharges. The Plus Kit exchanges the standard Chlorine/pH block comparator for a disc comparator and chlorine wheel. The enables the addition of a wide range of other parameters without the need to purchase expensive photometers. Simply take an additional disc and reagents.

The Kit also includes a range of additional items that allow for greater safety and environmental protection:

  • Hand held digital, waterproof, buoyant conductivity/TDS/pH/Temperature meter
  • Comparator block and cuvettes WITH Chlorine wheel (Expandable to over 100 additional parameters as required)
  • 10 Biohazard bags for contaminated pad and membrane storage and disposal
  • 5 pairs of disposable gloves for increased user safety when handling potentially contaminated samples
  • 500ml wash water bottle with directional spray
  • Chinagraph pencil for labelling of the aluminium petridishes for easy identification
  • Disposable inoculating needles (x20) for easy counting of colonies after incubation
  • Total Arsenic (3+ and 5+) Tests (5 Tests)
  • Heavy Metals Test Strips (Pack of 50 test strips)
  • Protective Eye Shield

The PLUS kit range now also includes testing capability for Arsenic and an indicator test kit for total 2 valent heavy metals (Copper, Zinc, Lead, Mercury etc).

Designed to carry out five basic tests to measure the quality of drinking water, (microbiological quality, turbidity, free chlorine, total chlorine and pH), the kit is primarily used in the field, but may also be used in a laboratory or other permanent location. The kit can also be supplied with a range of accessories and upgrades that will increase the scope of your water quality monitoring.

Critical Parameter Tests

The kit will perform the following tests:

Thermotolerant (faecal) Coliform Count: The kit includes a portable, battery-powered incubator capable of making five cycles of incubation without mains electricity, generator or vehicle power. Thermotolerant (faecal) Coliform counts can be obtained within 14 to 18 hours of sampling giving a reliable indication of sanitary risk without need for transport or laboratory facilities.

Turbidity Test: A measure of the amount of suspended matter in a water supply. Suspended material may consume chlorine disinfectants and require treatment before disinfection.

Chlorine & pH Tests: Many emergency water supplies are dosed with chlorine disinfectant to ensure their safety as drinking water. These tests allow rapid assessment of chlorine levels and aid the efficient control of dosing thereby avoiding waste and ensuring that enough chlorine is present to safeguard the supply.

Other Tests: A conductivity meter is provided as an optional component of the kit. Conductivity provides an indication of contamination e.g. saline intrusion or sewage pollution. Additional equipment can be included on request to test for chemicals that may be of local importance.

You will need the following items to start testing:

  • Pressure cooker or portable steriliser or access to an autoclave e.g. in a hospital.
  • Methanol (approx 1 ml per test)
  • Distilled water
  • 1 litre measuring cylinder or beaker
  • Clean Cloths
Included
INCLUDED
  • Single Incubator in Pelican Case
  • O-Ring x 2
  • Filter Funnel
  • Aluminium Gasket
  • Battery Charger
  • Bronze Disc x 2
  • Sample Cup
  • Fuse
  • Lanyard
  • External battery power lead with 2-pin standard European plug
  • Recalibration Incubator Lid
  • Incubator Lid
  • 3 sets of 16 alumnium petridishes with strapped housing
  • Methanol Dispenser
  • Silicone Rings x 2
  • Spirit Thermometer
  • Trimmer Tool
  • Turbidity Tube (pair)
  • Tweezers
  • Vacuum Pump and Cup
  • Handheld digital meter
  • Comparator block and cuvettes with chlorine wheel
  • 10 Biohazard bags
  • 5 pairs of gloves
  • 500ml wash water bottle
  • Chinagraph pencil
  • Inoculating needles x 20
  • Total Arsenic (3+ and 5+) Tests (5 Tests)
  • Heavy metals test strips
  • Protective eye shield
  • Membrane filters and pads x 200
  • Pad dispenser
  • Culture medium 38.1
  • DPD No.1 Tablets x 250
  • DPD No.3 Tablets x 250
  • Phenol Red Tablets x 250
Additional Information
ADDITIONAL INFORMATION
  • Complete Kit Weight: 10kg
  • Dimensions: 34.4 x 14.6 x 29.7cm
  • Test Capacity: 16
  • Filter Size: 47mm / 0.45µm pore size
  • Incubator Temperature: 44°C
Subscribe to Newsletter Icon Subscribe to the DelAgua Newsletter